• 
• 
• 
• 

We started business in 2004 by only doing blow mold maintenance. By considering the transportation cost will be higher if some repair or modification happened, then we decided to manufacture the mold in local. We started make new mold locally in2006 after some staffs returned from Japan who already been trained and acquire skills and ideas. Then our story began since here.
After 15 years, now we claim our position as Pioneer in Blow Mold especially in automotive fields. The market share of blow mold gradually increasing, and we achieved 90% as Top position in Indonesia. We are the only Japan company who produce automotive blow mold.
When procuring molds from overseas other than Japan, there is a tendency for quality to be inadequate compared to Japan, but our staff have mastered skills improvement and Japanese thinking in Japan, and are the same as in Japan. It is also attractive that the level mold is completed.

• 
• 
• 
• 

Initially, no japanese mold maker in Indonesia that manufactures vacuum molds, but a refrigerator manufacturer wanted to make vacuum molds in Indonesia and was looking for a vacuum mold maker. At that time, we received a request to make a mold from our customer, which was only engaged in the blow mold business at that time. After that, I learned all the know-how of vacuum mold manufacturing from the manufacturer and absorbed it, and finally succeed to acquire the technology.
Since then, we have been strengthening our ability to provide vacuum molds for refrigerators to Panasonic's five countries: Brazil, Philippines, Vietnam, Indonesia, and India. Now, beside to refrigerators, we can handle cars, medical equipment, etc. regardless of the industry.
We are the only company in Indonesia who able to manufactures large vacuum molds, which handle up to 2200 mm or more. Both the bathtub type ""Female"" that has been used from the beginning and also Male Type which use mainstream compressed air . In addition to vacuum dies, we can also manufacture urethane foam jigs (cores) and trimming dies for deburring."

• 
• 
• 
• 

CAD / CAM data is an intellectual property that can only be found on the screen. We are one of the few mold makers in Indonesia that owns an intellectual property right sales license that can sell such data. The CAD / CAM data sales business started around 2016, and sales are expected to be 8-9 million Japan Yen in 2021. Regarding CAD / CAM data, our design staff are trained in Japan so guarantee data quality as Japan level.
In addition, if requested from customer, we can send the data to Japan to be reviewed it by Japan experienced staff who have been working for 30 years. You will received the data at a same high quality or closer with Japan level.